0425119K-E40

破布, 白色的 100% Cotton NA.NA.23 29 07
Waste Item spec: 浪费: Cotton white sterilized Cat name:IMPA. Cat no:23 29 01. Waste NA.NA.23 29 01
手套, 普通棉质 NA.NA.19 01 01
“Battery Chargers. Output AC Power:
电压 6-35 v, Ampere 20A. 输入
DC Power: 电压 100 v, 安培
12.0一个” 不适用.不适用.79 26 53
“Torque Tools/Torque Wrenches,
preset type, 全新或二手== (MINIMUM
20 to MAXIMUM 100) N.m-cm. Sq.
Drive 12.7mm” NA.NA.61 14 39
“Torque Tools/Torque Wrenches.
Torque wrench, preset type,
全新或二手== (MINIMUM 60 到
MAXIMUM 420) N.m-cm. Sq. 驾驶
19.0毫米” NA.NA.61 14 33
Hand Snips NA.NA.61 17 74
Calf Skin Working Gloves NA.NA.19 01 12
“减压阀 (15 燃油泵零件号)
with threaded connection.
曾经驾驶过. Type of Pressure
Rating LOW STANDARD.
Control pressure from 0.5 阳极 FE10045/DIA100 x 400L” NA.NA.75 69 19
Pneumatic Vakuum Cleaner V 300 hose 25mm suction capasity 1,2m3 NA.NA.59 07 21
“Water Activated Fiberglass Tapes
for Pipe Repair” NA.NA.81 24 51
“Syntho -Glass. 5,08sm/1.524m
Weicon UW Cream Wet Surface” NA.NA.81 23 34
Devcon Stainless Steel Putty (英石) NA.NA.81 22 92
Silicone Gaskets NA.NA.81 26 71
“GUN FOR SILICONE SEALANT (350 GR)
TABANCA BIR ADET KULLANIMDA VARDIR VE ESKI DURUMDADIR.” NA.NA.81 26 03
Teflon Seal Tape,Width 20mm,Thick 0.1mm,10mtrs/Roll NA.NA.81 25 02
Adjustable Pipe Repair Clamps 10 pcs/case NA.NA.81 23 66
“Pilot Non-Asbestos
Jointing Pilotseal 172. 1
x1.500×1.500 毫米” NA.NA.81 12 82
“Pilot Non-Asbestos
Jointing Pilotseal 172.
1.5×1.500×1.500 毫米” NA.NA.81 12 84
“Pilot Non-Asbestos
Jointing Pilotseal 172. 2X
1.500×1.500 毫米” NA.NA.81 12 83
“Pilotpack 67 Packings
for Sea and Fresh Water, 5毫米” NA.NA.81 07 02
“Pilotpack 67 Packings
for Sea and Fresh Water, 6.5毫米” NA.NA.81 07 03
“Pilotpack 67 Packings
for Sea and Fresh Water, 8毫米” NA.NA.81 07 04
滚珠轴承. 6309ZZ C3 NA.NA.77 07 60
滚珠轴承. 6209ZZ C3 NA.NA.77 06 10
“Globe valve (燃油泵零件号), 苏尔寿 12ZV, 例如
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN 3/8″” NA.NA.75 51 02
“Globe valve (燃油泵零件号), 苏尔寿 12ZV, 例如
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN ½″” NA.NA.75 51 03
“Globe valve (燃油泵零件号), 苏尔寿 12ZV, 例如
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN ¾″” NA.NA.75 51 04
“Globe valve (燃油泵零件号), 苏尔寿 12ZV, 例如
female threaded, threaded bonnet,
STRAIGHTб , SIZE DN 1″” NA.NA.75 51 05
Ball valve NA.NA.75 24 01
Ball valve NA.NA.75 24 02
“Forged Brass Screwed End
Ball Valves. ¾″” NA.NA.75 24 03
“Forged Brass Screwed End
Ball Valves. 1”” NA.NA.75 24 04
“Screw Down Check Globe Valves.
青铜,16 公斤/平方厘米, GL-30==- 15. Face to
Face 110, Flange Diam, -95. 法兰
Bolt Hole : 沥青- 70, Number-4,
Hole-15. F-7409” NA.NA.75 10 01
“Screw down check valve, 角度,
苏尔寿 12ZV,
5 山武, GL-30== 32, Face to Face-
80, Flange Diam.-115, Flange Bolt
Hole: 沥青- 90, 数字- 4, Hole-
15毫米, Angle Valve F-7352” NA.NA.75 10 64
BRASS FLARES UNIONS 6 MM NA.NA.73 40 22
BRASS FLARES MALE CONNECTION 6MM NA.NA.73 40 03
BRASS FLARES MALE CONNECTION 8MM NA.NA.73 40 05
“Brass flareless union tee, 管子 0.0-
6毫米, NUT THREAD SIZE- ¼” NA.NA.73 40 62
“Brass Sleeves
for Flareless Tube Fitting. Tube OD-
6毫米, Length-9mm” NA.NA.73 41 02
“Brass Nuts for Flareless
Tube Fitting, OD-6mm, Nut Thread-
12-1,5” NA.NA.73 41 12
“Abrasive Wheels, 直的, 一个,
200x25x32, Grain size 150, Max peed
3000 米/分钟” NA.NA.61 48 20
Brass Threaded Unions. Size-1/8″ NA.NA.73 22 61
Brass Threaded Unions, Size ½″ NA.NA.73 22 62
Brass Threaded Unions. Size 3/8″ NA.NA.72 22 63
Brass Threaded Unions. Size ¾″ NA.NA.72 22 64
Brass Threaded Unions, Size 1″ NA.NA.72 22 65
“Needle File Sets. 带螺钉和螺母的制动衬片- 215 毫米,
5 PCS Set, 2nd Cut” NA.NA.61 45 31
“Abrasive Wheels, 直的, 一个,
200x25x32, Grain size 150, Max peed
3000 米/分钟” NA.NA.61 48 20
“Abrasive Wheels, 直的, 一个,
200x25x32, Grain size 150, Max peed
3000 米/分钟” NA.NA.61 48 20
Brass Threaded Caps. Size 3/8″ NA.NA.73 21 78
Brass Threaded Caps. 卡特彼勒 320b-s6k-气缸体. ½″ NA.NA.73 21 79
Brass Threaded Caps. 卡特彼勒 320b-s6k-气缸体, ¾″ NA.NA.73 21 80
Brass Threaded Caps. Size 1″ NA.NA.73 21 81
“Square Head Steel Threaded Plugs.
¾″” NA.NA.73 17 80
“Square Head Steel Threaded Plugs.
1”” NA.NA.73 17 81
Copper Tubes (5.5地铁) NA.NA.71 14 04
“铜管, seamless, 8 毫米, 1.2
毫米, 10 地铁” NA.NA.71 14 11
“螺栓, 六角头, SKL.VD26-20-AL1.NA 气缸盖, ungalv., half
threaded, m5x60mm” NA.NA.69 01 67
“螺栓, 六角头, SKL.VD26-20-AL1.NA 气缸盖, ungalv., half
threaded, m6x40mm” NA.NA.69 01 93
“螺栓, 六角头, SKL.VD26-20-AL1.NA 气缸盖, ungalv., half
threaded, m8x40mm” NA.NA.69 02 23
Hexagon Nuts m6x40 NA.NA.69 28 04
Hexagon Nuts m8x40 NA.NA.69 28 05
“Resistance Thermometer,
screw-in type with
interchangeable insert
1810- Type BM” NA.NA.65 25 60
“Thermalimager, GT300C系列: -30°C to
650双循环冷却” NA.NA.65 27 55
“压力计, glycerin filled ,round
rim case
Vibration service Square shank
PF3/8”, 直径. 75 毫米,
0 – 15 山武” NA.NA.65 15 16
“压力计. BottomConnection
with Back Flange. 压力范围
0-6 山武, 大发 6DLB-19 BANJO – 3/8”, 直径. 75 毫米” NA.NA.65 31 67
“压力计. Bottom Connection
with Back
法兰. 0-400, 大发 6DLB-19 BANJO – 1/4”,” NA.NA.65 31 93
“压力计. Bottom Connection
with Back
法兰. 0-600” NA.NA.65 31 98
“Precision Flat Try Squares. Size mm:
1
英石. Grade
50 x 40” NA.NA.65 09 36
Cylinder head with inlet & 排气阀 (笔记: 排气. Seat ring with two o-ring) WARTSILA.6L20.120025
“Non-Spark 12 Point Double 10×13
End Wrenches” NA.NA.61 55 14
“Non-Spark 12 Point Double 12×14
End Wrenches” NA.NA.61 55 15
“Precision Flat Try Squares. Size mm:
1
英石. Grade
50 x 40” NA.NA.65 09 66
WATER FINDING PASTE (İSKANDİL MACUNU) NA.NA.65 08 90
Gasoil Finding Paste NA.NA.65 08 91
OIL GAUDING TAPE(20 地铁) White Tape NA.NA.65 08 52
Vernier Caliper NA.NA.65 05 04
“Outside Micrometers with Counter.
Graduated in 0.01 毫米. GT300C系列 25-
59毫米” NA.NA.65 03 41
Valve Seat Cutters NA.NA.63 34 51
“Screw Plate Sets (Stocks & Dies) 水温传感器类型
Metric Coarse.
Model OK 140 (1/4,-1 ¼″)” NA.NA.63 22 37
“Screw Plate Sets (Stocks & Dies) 水温传感器类型
Metric Coarse Threading.
Model F48 (M – 3, 4, 5, 6, 7, 8, 9,10)” NA.NA.63 22 10
“Non-Spark 12 Point Double 14×17
End Wrenches” NA.NA.61 55 16
“Non-Spark 12 Point Double 17×19
End Wrenches” NA.NA.61 55 17
“Non-Spark 12 Point Double 17×21
End Wrenches” NA.NA.61 55 18
“Non-Spark 12 Point Double 19×21
End Wrenches” NA.NA.61 55 19
“Non-Spark 12 Point Double 21×26
End Wrenches” NA.NA.61 55 20
“Non-Spark 12 Point Double 26×32
End Wrenches” NA.NA.61 55 21
“Non-Spark 12 Point Double 32×35
End Wrenches” NA.NA.61 55 22
“Stainless Steel Ratchet Handles
for Socket Wrenches” NA.NA.61 68 81
Rachet handles NA.NA.61 68 82
Drill sets Steel case NA.NA.63 02 55
PIPE WRENCH 200MM NA.NA.61 13 02
Pipe Wrenches NA.NA.61 13 04
“打开 & 12 Point Box Wrench Sets .
15° Angle Open End-12 Point
Opening Box End. Contents &
opening mm (8×8, 10×10, 12×12,
13×13, 14×14, 17×17,19×19,
21×21,22×22, 24×24 ) 10’s” NA.NA.61 05 31
棘轮手柄, NA.NA.61 04 05
COMPACT GAS TORCHES (WEG.160L-2.NA 电机) NA.NA.61 70 16
SPARE GAS CARTRIDGE NA.NA.61 70 17
“90° Angle Thermometers, ESPRO.NA.65,
2728, casing size, 200 X 36 毫米,
immersion length 63 毫米, catalogue
No.2722-351106321, 0- 100,” NA.NA.65 20 04
“90° Angle Thermometers, ESPRO.NA.65,
2728, casing size, 200 X 36 毫米,
immersion length 63 毫米, catalogue
No.2722-351106321, 0- 160,” NA.NA.65 20 07
“Pressure Gauges, Rear Connection
with Direct Mounting. (如图. 3). D- 63,
GT300C系列 0-4 Kg/cm². G ¼″” NA.NA.65 32 13
“Pressure Gauges, Rear Connection
with Direct Mounting. (如图. 3). D- 63,
GT300C系列 0-6 Kg/cm². G ¼″” NA.NA.65 32 16
“Pressure Gauges, Rear Connection
with Direct Mounting. (如图. 3). D- 80,
GT300C系列 0-6 Kg/cm². G ½″” NA.NA.65 32 17
“Pressure Gauges, Rear Connection
with Direct Mounting. (如图. 3). D- 80,
GT300C系列 0-4 Kg/cm². G ½″” NA.NA.65 32 14
“Pipe Wrenches Bahco. Universal Pipe
扳手. Length mm- 280.
Max Opening 36mm.
Bahco Type No. 141” NA.NA.61 61 12
“Pipe Wrenches Bahco. Universal Pipe
扳手. Length mm- 370.
Max Opening 52mm.
Bahco Type No. 142” NA.NA.61 63 14
“Non-Spark Side Cutting Plie. AFS11045/38kgx450mmxDIA110
mm 180.” NA.NA.61 58 67
“Non-Spark Ball Pein Hammers.
Nominal Size ½″. 供油泵 225 grm.” NA.NA.61 57 02
“Non-Spark Ball Pein Hammers.
Nominal Size 1″. 供油泵 453 grm.” NA.NA.61 57 04
“Non-Spark Double Face Hammers
with Handle. Nominal Size 5. 供油泵
2.27 阳极 FE10045/DIA100 x 400L” NA.NA.61 57 32
“Non-Spark Double Face Hammers
with Handle. Nominal Size 12. 供油泵
5.45 阳极 FE10045/DIA100 x 400L” NA.NA.61 57 36
“Machinist Files. Triangle. Cut-Second
Cut. AFS11045/38kgx450mmxDIA110- 200毫米” NA.NA.61 44 23
“Milling Vises. Milling F Type. Jaw –
153x112x43. (Fixed Base)- 465 X 183
x 109” NA.NA.61 37 43
Punching tool sets 16 pcs Punching dies (6,7,8,9,10,11,12,16,19,22,25,28,32,35,38.) NA.NA.61 30 56
“Weicon Cable & Wire Strippers.
Model – Cable Stripper S4-28 Multi” NA.NA.61 17 31
“Electric Blowers / Exhausters. 型号。-
EFI75. Motor 115V” NA.NA.59 15 01
“Jig saw, electric portable, 切割
容量 - 13 毫米, POWER – AC
110V Single Phase, MODEL BOSH” NA.NA.59 11 86
Spare Blades For Electric Jig Saws NA.NA.59 11 73
(+) 飞利浦螺丝刀 150MM NA.NA.61 22 75
Screwdriver plastic handle( no.4-200) NA.NA.61 22 76
“Vise Grip Combination Pliers (Mole
Grip Wrenches). AFS11045/38kgx450mmxDIA110 175 毫米” NA.NA.61 16 42
SINGLE HEAD RACHET 17 NA.NA.61 10 30
SINGLE HEAD RACHET 19 NA.NA.61 10 31
“Wrenches, Double or Single Head.
Ratchet 12 观点. Opening. 21 丹麦 PRES-VAC 船用阀门及相关管道配件.
总体长度 290 毫米。” NA.NA.61 10 32
“Wrenches, Double or Single Head.
Ratchet 12 观点. Opening. 22 丹麦 PRES-VAC 船用阀门及相关管道配件.
总体长度 290 毫米。” NA.NA.61 10 33
SPARE BLADE FOR ELECTRIC JIG SAW NA.NA.59 11 77
“Electric Bench Grinders. Wheel Size
mm205 x 19 X 15.88. 门 600 w.
AC 110V Sin.11te Phase. For Wheel
Diam 205mm” NA.NA.59 10 52
CORDLESS DRILL DRIVER NA.NA.59 09 01
“High Pressure Cleaners Air Powered
Heavy Duty. Power Supply AC 110V.
1 ph 60Hz. Model C-11OE. 力量
Consumption 2 .2 千瓦 . 在职的
压力 110 酒吧” NA.NA.59 08 57
“Wire Brushes, Standard Handle.
Straight Handled Standard Length
270 毫米” NA.NA.51 06 60
Brush Counter Black Hair NA.NA.51 06 46
“Paint Roller with Handle. Nylon. 卡特彼勒 320b-s6k-气缸体
毫米. 100.” NA.NA.51 03 01
“Spare Paint Roller. Replacements.
Nylon. 卡特彼勒 320b-s6k-气缸体 100 毫米。” NA.NA.51 03 49
“Wrenches, Double or Single Head.
Ratchet 12 观点. Opening. 22 丹麦 PRES-VAC 船用阀门及相关管道配件.
总体长度 310 毫米。” NA.NA.61 10 34
“Wrenches, Double or Single Head.
Ratchet 12 观点. Opening. 27 丹麦 PRES-VAC 船用阀门及相关管道配件.
总体长度 330 毫米。” NA.NA.61 10 36
SINGLE HEAD RACHET 30 NA.NA.61 10 37
SINGLE HEAD RACHET 32 NA.NA.61 10 38
打开 12 POINT BOX WRENCH SET 15 ANGLE OPEN END WRENCHES SET NA.NA.61 05 34
Pneumatic drun pumps, 日本CKD电磁阀: 到, 软管: Ø32mm x 3M NA.NA.59 16 53
“Plastic Diaphragm Pumps.
Husky.515. Connection Size ½″.” NA.NA.59 17 67
“Non-Spark 12 Point Double 10×12
End Wrenches” NA.NA.61 55 13
ANGLE RADIATOR BRUSH 25 MM NA.NA.51 01 65
Flat Paint Brushes. 带螺钉和螺母的制动衬片 25 毫米. NA.NA.51 01 01
“Door closer, parallel type, LEFT OR
RIGHT HAND USE,
MAXIMUM DOOR WEIGHT 60-
80(AF9035/19.8kg/尺寸)” NA.NA.49 06 24
“Faceshield, with forehead protection.
型号。” 不适用.不适用.33 11 44
“Spare shield, polycarbonate, 为了
forehead protection type faceshield” 不适用.不适用.33 11 48
PLASTIC CHIPPING GOOGLE ANTI FOG NA.NA.33 11 42
“Rechargeable LED Hand Lamps.
型号。- XT-50” 不适用.不适用.33 06 12
Air Dusster Long Nose NA.NA.27 06 12
Air Dusster Long Nose NA.NA.27 06 13